18 July 2013

Lowongan Kerja Tambang Migas PT Supraco Indonesia Terbaru Agustus 2014

Jakarta based company with more than 33 years of experience in providing services to oil and gas industry and Geothermal in Indonesia. We are seeking for best candidates to fill the vacant position for our projects

Expiry date: July 31, 2013

1. Civil / Structural Inspector – Infrastructure Facilities (CP-A222)

RESPONSIBILITY AND DUTIES:
• Oversee inspection of structural activities conducted at contractors and sub-contractors facilities.
• Coordinate with other structural.
• Review original material certificates for compliance to codes and specifications
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Ensure storage and use of welding consumables is per manufacture’s recommendations and full certification
• Review Contractor’s field inspection and test reports
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Review welder qualifications certifications, and attend welder qualification
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.
• Implement project Construction Surveillance Program

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Working Knowledge of:
- Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
- Piping fabrication methods
- Welding processes and NDE techniques including evaluation methods
- Piping, Isometrics and shop Drawings
• Trained to authorize work permits (e.g. hot work, confined space, etc.)
• Good oral and written English language skills
• Well versed in safe work practices
• Demonstrated ability to communicate in multiple languages
• Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.
• Skills and experience in the development of commissioning and start-up budget,.
• Skills and experience in the development of manpower and vendor support mobilization/demobilization plan and schedules, and the development of lists of required commissioning and start-up spares, consumables, first-fills, special tools, temporary equipment, etc.

Qualifications:
• Bachelor degree in a related field is preferable and is a plus
• Certificates in planning and budgeting from recognized institutions are preferable
• Advance skill in project planning with Primavera and MS Project is a must
• Advance skill in the computer application software required in the project (Word, PowerPoint, Excel, etc.) is a must
• Advance skills in project estimating and budgeting is a must
Placement : Cepu Site


2. Regulatory & Permit Site Interface (CP-A221)

RESPONSIBILITY AND DUTIES:
• Onsite representative for all environmental, regulatory and permitting issues
• Coordinate ongoing efforts to identify and obtain various permits for scope of work in a timely manner to comply with national, provincial and local (Indonesian) rules and regulations
• Interface with the E&R functional group to support project activities and implement best practices and lessons learned
• Work and participate with project team and functional group on preparation of project support documents, such as Environmental Management Plan (EMP), Waste Management Plan (WMP), Spill Prevention and Response Plans (SPRP), protection of surface water and other related studies for the project
• Support in selecting third party consulting services with respect to Oil Spill Response Plan (OSRP) preparation and development in coordination with Functional group and Productions
• Interface with project engineering and construction resources on project design and implementation details required to satisfy project permit and environmental requirements
• Develop Environmental Standard – e.g. stream crossing, erosion control, etc
• Coordinate development and submittal of EMCAPS deliverable for regulatory compliance plan (RCP) and environmental management plan (EMP) for project facilities
• Supervise, monitor and review the plan of the implementation environmental protection measure according to RKL and RPL (environmental monitoring and management plan) during construction which is performed by third party environmental consultants
• Interface and coordinate activities with E&R functional group, as appropriate, on preparation of permitting plans and government agencies/inspector interface
• Review the RKL/RPL report for socioeconomic issue developed by EPC Contractor prior submitting to functional group in Development
• Review and endorse EPC contractor environmental and regulatory documents and deliverables, as prescribed in project Coordination Procedure
• Prepare project internal environmental and regulatory stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests
• Assist project team, as appropriate, on the field inspection, special tasks and studies related to overall SH&E and permitting requirements.
• Support the E&R functional group on Regframe implementation and implement regular environmental compliance assessments as part of the OIMS requirements for the project.
• Ensure the implementation of the Upstream EMDC Environmental Standard is adhered to appropriately and align with Corporate Environmental guidance
• Implement and assist training in environmental standard and technologies to EPC Contractor

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Broad technical and SH&E skills with basic understanding of project management and SH&E functional work processes
• 5+ years broad-based experience preferred, in environmental compliance and impact mitigation related to oil and gas industry, processing and transportation, with prior experience in one or more SH&E-related disciplines
• process, and in particular SH&E and OIMS deliverable requirements
• Knowledge of EMDC strategies and key business drivers
• Good interpersonal and communication skills
• Knowledge of EMCAPS
• Adaptable to changing priorities
Placement: Jakarta Base


3. E&I Construction Tech Foreman – Field Facilities (CP-A223)

RESPONSIBILITY AND DUTIES:
• monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Support Construction Site Manager in monitoring and appraising the contractor’s performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
• Verify physical progress
• Monitor mechanical acceptance and start-up activities between operating unit and contractor
• Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
• Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
• Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
• Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
• Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
• Witness installation of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Monitor loop checks and review records for the same in accordance with technical requirements
• Monitor construction and installation and testing of instrument tubing works
• Review Contractor’s field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
• Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Minimum ten (10) year’s experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
• Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Well versed in safe work practices
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
Placement : Cepu Site

4. Civil Geotechnical Inspector – Infrastructure Facilities (CP-A224)

RESPONSIBILITY AND DUTIES:
• Site supervision of ground investigation fieldworks contracts ensuring compliance with specification and common practice.
• Inspect geotechnical instrumentation design and installation.
• Site supervision of pile installation works including pile loading and integrity testing.
• Evaluating recommended countermeasures for low strength soils in contact with structural foundations.
• Verify proper dam foundation slope stabilization and structures, including soil blending of native and borrow materials.
• Site supervision of installation of of river water intake.
• Supervision of earthworks placement and verification testing.
• Verification dam contraction procedures are followed

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Working Knowledge of:
o Soil Mechanics field tesing methods, including determining Vane Shear Strengths in cohesive soils using ASTM D 2573 method and Cone Penetration Test per ASTM D3441.
o Testing of swelling and dispersive soils (E.g. Emerson class number, double hydrometer or Pinhold).
o Rules and Regulations for Dam Safety and Dam Construction in Indonesia.
o Seepage Analysis and Control for Dams (E.g. U.S. Army Corps of Engineers EM 110-2-1901)
• Degree in Civil/Geotechnical/Geological Engineering. 15 years of relevant experience.
• Proven design investigation and analysis of geotechnical civil engineering.
• Well versed in safe work practices.
• Demonstrated ability to communicate in multiple languages
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
• Thorough understanding of applicable project specifications
• Trained to authorize work permits (e.g. hot work, confined space, etc.)
• Good oral and written English language skills
Placement : Cepu Site

5. Environment, Regulatory & Socioeconomic Interface (CP-A225)

RESPONSIBILITY AND DUTIES:
1. Coordinate ongoing effort to obtain various permits for EPC’s scope of work in a timely fashion in order to remain in compliance with National, Province, and Local regulations.
2. Interface with the functional groups as necessary to access timely support for project activities, identify/implement best practices and lessons learned
3. Work with PMT and Functional groups to support development of documents such as oil spill response plan and waste management plan.
4. Interface with project engineering and construction to ensure environmental and regulatory compliance.
5. Coordinate development and submittal of EMCAPS regulatory compliance and environmental management plans for project facilities
6. Work with consultants, as necessary, to prepare and submit requisite environmental, regulatory and socioeconomic impact assessments.
7. Interface and coordinate activities with functional groups, as appropriate, to develop and implement appropriate plans for interfacing with Non-Governmental Organisations (NGO’s) and Government agencies.
8. Review and advise PMT about EPC contractor’s environmental, regulatory and socioeconomic documents and deliverables, as prescribed in project Coordination Procedure.
9. Prepare project internal environmental, regulatory and socioeconomic stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests.
10. Assist project team, as appropriate, on special tasks and studies related to overall Environmental and Regulatory permitting requirements, and community affairs at shore tie-in and offshore work sites.
11. Develop amicable relationships to facilitate open communication and transparency in processes and procedures with various Government offices (BPMIGAS, Sea Com, etc) that are responsible for issuing recommendations and approvals for regulatory and environmental permits.
12. Work closely with ITS to exploit full benefits of the work scope for which ITS has been contracted.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Broad project management, technical and SH&E skills with good understanding of working in a project setting and an ability to interact amicably with various external stakeholders
• 5+ years broad-based experience preferred, with prior experience in one or more related disciplines (i.e. Environmental, Regulatory and Socioeconomic)
• Experience interfacing with NGO and other similar organisation
• Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
• Knowledge of EMDC strategies and key business drivers
• Good interpersonal and communication skills in English and Bahasa Indonesia. Ability to speak Jawanese is an additionally desirable attribute.
• Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
• Willingness to undertake business travel and/or field based short term assignments
• Ability to interact proactively in the Project’s interest, with EPC contractor, local Government offices and local community in East Jawa province.

Placement : Jakarta Base

6. Crane Inspector (CP-A226)

1) Minimum S1 Engineering with around 3 years experience
2) Experience with Crane Inspection in Oil & Gas
3) MIGAS Crane certification
4) Fluent in English, written & spoken
5) Wiliing to be place anywhere around Indonesia
6) Permanent status is possible

7. Rotating Inspector (CP-A227)

1) Minimum S1 Engineering with around 3 years experience
2) Experience with Rotating Inspection in Oil & Gas
3) MIGAS Rotating certification
4) Fluent in English, written & spoken
5) Wiliing to be place anywhere around Indonesia
6) Permanent status is possible

8. Pressure Vessel Inspector (CP-A228)

1) Minimum S1 Engineering with around 3 years experience
2) Experience with Pressure Vessel Inspection in Oil & Gas
3) Familiar with Design Drawing
4) MIGAS Pressure Vessel certification
5) Fluent in English, written & spoken
6) Wiliing to be place anywhere around Indonesia
7) Permanent status is possible

9. Electrical Inspector (CP-A229)

1) Minimum S1 Engineering with around 3 years experince
2) Experience with Onshore Construction Electrical Inspection in Oil & Gas
3) Familiar with Design Drawing
4) MIGAS Electrical certification
5) Fluent in English, written & spoken
6) Wiliing to be place anywhere around Indonesia
7) Permanent status is possible

10. Pipeline Inspector (CP-A230)

1) Minimum S1 Engineering with around 3 years experince
2) Experience with Onshore Pipeline Inspection in Oil & Gas
3) Familiar with Design Drawing
4) MIGAS pipeline certification
5) Fluent in English, written & spoken
6) Wiliing to be place anywhere around Indonesia
7) Permanent status is possible

Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.

We apologize if information Lowongan Kerja Tambang Migas PT Supraco Indonesia has expired, please visit Latest Jobs Information or use Google Search to get Latest Jobs Information on The Web. Update 18 July 2013 . . Hopefully useful, and SUCCESS FOR YOU!!!! THANKS.
Subscribe Lowongan Kerja Terbaru Via Email
Share :

0 komentar :

Post a Comment